2015 Cadillac ATS
Mileage
131,085
Service Date
8/11/2023
Services Performed
- COOLING SYSTEM – Flush – Engine
- Note: If Parts Are Being Replaced, Replace Parts Prior To Performing Cooling System Service. If the Cooling System is Heavily Contaminated Drain the System then Perform the Coolant Service. *Additional Labor May be Required.* Note: JB Radiator Cleaner is a Non-Caustic Non-Acidic Radiator Cleaner, Flushing the System is Not Required After Use. 1. Pour Entire Contents JB Radiator Cleaner in the Existing Coolant/Water. 2. Cycle Radiator Cleaner For 15-60 Minutes at Normal Operating Temperature Neutralize Acids, Dissolve Corrosion Build Up, and Improve Fluid Circulation. 3. Drain Used Coolant/Water and Cleaner to Remove the Harmful Contaminants. 4. Fill the Cooling System with Manufacturer Recommended Coolant (Antifreeze) to the Manufacturer Specified Fluid Level. 5. Use JB Cooling System Protector & Water Pump Lubricant to Condition the Metal; Smooth Out Cuts and Rough Grooves in Metal Caused by Cooling System Operation, Provide Lubrication to the Water Pump, Stop Electrolysis (The Cause of Rust), And Hold the Ph Balance of the Coolant to Prevent Alkaline and Acid Build Up. 6. Pressure Test Cooling System, Check for Leaks and Proper Operation.
RICH S. gave our service a 5 star review on 8/11/2023
